What bridge to use? - Minstrel Banjo2024-03-29T10:45:12Zhttps://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?feed=yes&xn_auth=noThanks for all the advice, I…tag:minstrelbanjo.ning.com,2011-11-08:2477478:Comment:552552011-11-08T02:20:30.524ZRichard McLainhttps://minstrelbanjo.ning.com/profile/RichardMcLain
Thanks for all the advice, I made one out of pine a little taller to bring out the volume, thin at the top, two feet and used the rosin trick successfully! This group is so very helpful! Thank you again, this banjo plays great now!
Thanks for all the advice, I made one out of pine a little taller to bring out the volume, thin at the top, two feet and used the rosin trick successfully! This group is so very helpful! Thank you again, this banjo plays great now! Thanks my friends!tag:minstrelbanjo.ning.com,2011-11-08:2477478:Comment:552532011-11-08T01:03:34.228ZRichard McLainhttps://minstrelbanjo.ning.com/profile/RichardMcLain
Thanks my friends!
Thanks my friends! I make a bridge or two every…tag:minstrelbanjo.ning.com,2011-11-08:2477478:Comment:550292011-11-08T00:50:04.815ZBell Banjoshttps://minstrelbanjo.ning.com/profile/TerryBell
<p>I make a bridge or two every day. Today I made 5.</p>
<p>Pine is best. If you have Nylguts or gut with a wound 4th, poplar is best because in time the wound 4th is gonna dig in. I would even guess the softer bass for a gut set, I have used basswood for guts and the sound is great.</p>
<p>I have a method for determining bridge height. I tune the 4th down to Gb and hit it hard - if it rattles on the fingerboard the bridge is too low. If it doesn't rattle tuned to Gb it sure won't when tuned…</p>
<p>I make a bridge or two every day. Today I made 5.</p>
<p>Pine is best. If you have Nylguts or gut with a wound 4th, poplar is best because in time the wound 4th is gonna dig in. I would even guess the softer bass for a gut set, I have used basswood for guts and the sound is great.</p>
<p>I have a method for determining bridge height. I tune the 4th down to Gb and hit it hard - if it rattles on the fingerboard the bridge is too low. If it doesn't rattle tuned to Gb it sure won't when tuned up to G.</p>
<p>My banjos have about a 1 1/2 - 2 degree neck slant. The originals hardly had any. Modern guitars have 3 degree.</p>
<p>I like a big round sound with clarity. I want it all. This neck angle puts a pressure on the bridge that brings out the volume but keeps the bridge 'afloat' on humid days, in other words the skin sinkage is minimal.</p>
<p>The old bridges were thinnish.. I like the looks of them and the violin bridge principle that the feet of the bridge is 2, at the most 3 times wider than the thickness at the top. If the feet are too wide your banjo will lose its midrange somewhat. If you want more boom on the bottom, make a bridge that is thick overall. And like Carl said, a taller bridge for more volume.</p>
<p>The main thing I keep in mind is the dreaded sinking skin or rattling string for whatever reason, and some of that reason is the adrenalin factor. It feels good at home but it gets rattly sounding when playing live because of your natural exitement and hitting the strings harder. So whatever material, thickness, position, or angle, I always keep the bridge a little on the tall side. Everyone loves the feel and sound of my banjos, so give it a try.</p> I tend to set the height of t…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:550282011-11-07T23:52:51.869ZJohn Mascialehttps://minstrelbanjo.ning.com/profile/JohnMasciale
<p>I tend to set the height of the bridge based on the banjo. I have a higher bridge on my Hartel, and the thumb string/bass side is a little higher than its oppsite. This is because my bass string sometimes buzzes when I really strike it hard. I still have a very close string action up on the neck, so the high bridge doesn't had any adverse effect.</p>
<p> </p>
<p>On my Wunderlich hybrid (I made the neck), after re-doing the neck recently, I have a much lower bridge than I used to. (The…</p>
<p>I tend to set the height of the bridge based on the banjo. I have a higher bridge on my Hartel, and the thumb string/bass side is a little higher than its oppsite. This is because my bass string sometimes buzzes when I really strike it hard. I still have a very close string action up on the neck, so the high bridge doesn't had any adverse effect.</p>
<p> </p>
<p>On my Wunderlich hybrid (I made the neck), after re-doing the neck recently, I have a much lower bridge than I used to. (The string action is now much closer to the neck than it used to be.) I was having some of the stability problems Tim mentioned with this one, the bridge wanted to bounce around a little. I ground up some rosin powder and put that under the two feet, and that solved the stability problem.</p> There may be no examples of 3…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:552522011-11-07T23:22:54.468ZTim Twisshttps://minstrelbanjo.ning.com/profile/TimTwiss
There may be no examples of 3 footed bridges, but I found them to be good for my instruments and style of play. I copied Jeff Menzies design. It works well for me, because I often have an aggressive touch pulling and striking...it often actually sends the bridge "rocking" in an unstable manner and bounces on the head. I can actually hear the bridge bouncing on the head. The extra foot adds stability.
There may be no examples of 3 footed bridges, but I found them to be good for my instruments and style of play. I copied Jeff Menzies design. It works well for me, because I often have an aggressive touch pulling and striking...it often actually sends the bridge "rocking" in an unstable manner and bounces on the head. I can actually hear the bridge bouncing on the head. The extra foot adds stability. Ha...I thought about that aft…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:550272011-11-07T23:05:10.275ZTim Twisshttps://minstrelbanjo.ning.com/profile/TimTwiss
Ha...I thought about that after I wrote it....looks funny!<br/><cite>Ian Bell said:</cite>
<blockquote><div><div class="xg_user_generated"><p>Wow Tim - A three foot bridge? That must be one big banjo!</p>
<p>(Sorry - it was a bad joke but somebody had to make it)<br/><br/><cite>Tim Twiss said:</cite></p>
<blockquote><div><div class="xg_user_generated"><p>I use a 3 foot bridge..sugar pine.</p>
<p>I like it.</p>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote>
Ha...I thought about that after I wrote it....looks funny!<br/><cite>Ian Bell said:</cite>
<blockquote><div><div class="xg_user_generated"><p>Wow Tim - A three foot bridge? That must be one big banjo!</p>
<p>(Sorry - it was a bad joke but somebody had to make it)<br/><br/><cite>Tim Twiss said:</cite></p>
<blockquote><div><div class="xg_user_generated"><p>I use a 3 foot bridge..sugar pine.</p>
<p>I like it.</p>
</div>
</div>
</blockquote>
</div>
</div>
</blockquote> How high do you suggest the a…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:553452011-11-07T22:56:56.190ZRichard McLainhttps://minstrelbanjo.ning.com/profile/RichardMcLain
How high do you suggest the action be, I'm used to it being level down the neck as a clawhammer player, but this seems to have a lot of differences than my modern banjos
How high do you suggest the action be, I'm used to it being level down the neck as a clawhammer player, but this seems to have a lot of differences than my modern banjos I use basswood that I've had…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:552512011-11-07T22:45:46.916ZIan Bellhttps://minstrelbanjo.ning.com/profile/IanBell
I use basswood that I've had around for making ship models. It comes in small sheets that are very conveniently bridge-width. You can get it at hobby stores like Michael's. It's light stuff and works nicely.…<br></br>
<blockquote cite="http://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?xg_source=activity#2477478Comment55343"><div><blockquote cite="http://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?xg_source=activity#2477478Comment55340"><div><div class="xg_user_generated"></div>
</div>
</blockquote>
</div>
</blockquote>
I use basswood that I've had around for making ship models. It comes in small sheets that are very conveniently bridge-width. You can get it at hobby stores like Michael's. It's light stuff and works nicely.<br/>
<blockquote cite="http://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?xg_source=activity#2477478Comment55343"><div><blockquote cite="http://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?xg_source=activity#2477478Comment55340"><div><div class="xg_user_generated"><span style="font-style: normal;"><br/></span></div>
</div>
</blockquote>
</div>
</blockquote> Don't be afeared to crank tha…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:550252011-11-07T22:40:36.389ZCarl Andertonhttps://minstrelbanjo.ning.com/profile/CarlAnderton
Don't be afeared to crank that action up, more volume is a good thing.
Don't be afeared to crank that action up, more volume is a good thing. Wow Tim - A three foot bridge…tag:minstrelbanjo.ning.com,2011-11-07:2477478:Comment:553432011-11-07T22:39:48.830ZIan Bellhttps://minstrelbanjo.ning.com/profile/IanBell
<p>Wow Tim - A three foot bridge? That must be one big banjo!</p>
<p>(Sorry - it was a bad joke but somebody had to make it)<br/> <br/>
<cite>Tim Twiss said:</cite></p>
<blockquote cite="http://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?xg_source=activity#2477478Comment55340"><div><div class="xg_user_generated"><p>I use a 3 foot bridge..sugar pine.</p>
<p>I like it.</p>
</div>
</div>
</blockquote>
<p>Wow Tim - A three foot bridge? That must be one big banjo!</p>
<p>(Sorry - it was a bad joke but somebody had to make it)<br/> <br/>
<cite>Tim Twiss said:</cite></p>
<blockquote cite="http://minstrelbanjo.ning.com/forum/topics/what-bridge-to-use?xg_source=activity#2477478Comment55340"><div><div class="xg_user_generated"><p>I use a 3 foot bridge..sugar pine.</p>
<p>I like it.</p>
</div>
</div>
</blockquote>