gourd banjo building - Minstrel Banjo2024-03-28T20:55:31Zhttps://minstrelbanjo.ning.com/forum/topics/gourd-banjo-building?commentId=2477478%3AComment%3A66405&feed=yes&xn_auth=noit's in the photo section rig…tag:minstrelbanjo.ning.com,2012-05-04:2477478:Comment:666352012-05-04T13:32:01.360ZMoschella Banjoshttps://minstrelbanjo.ning.com/profile/JamaicaPlainBanjos
<p>it's in the photo section right now. if you want any other specific photos, just message me.</p>
<p>it's in the photo section right now. if you want any other specific photos, just message me.</p> Is there still a chance you c…tag:minstrelbanjo.ning.com,2012-05-03:2477478:Comment:666652012-05-03T22:30:45.344Zjamie ganshttps://minstrelbanjo.ning.com/profile/jamiegans
<p>Is there still a chance you could upload some photos of which you had mentioned last weekend when you get a chance?<br></br> <br></br> <cite>Moschella Banjos said:</cite></p>
<blockquote cite="http://minstrelbanjo.ning.com/forum/topics/gourd-banjo-building#2477478Comment66603"><div><div class="xg_user_generated"><p>i always get the thinnest ones i can. they may be more susceptible to moisture, but i feel like a properly taut thin skin head produces the best sound.</p>
<p></p>
<p>i just did a gourd…</p>
</div>
</div>
</blockquote>
<p>Is there still a chance you could upload some photos of which you had mentioned last weekend when you get a chance?<br/> <br/> <cite>Moschella Banjos said:</cite></p>
<blockquote cite="http://minstrelbanjo.ning.com/forum/topics/gourd-banjo-building#2477478Comment66603"><div><div class="xg_user_generated"><p>i always get the thinnest ones i can. they may be more susceptible to moisture, but i feel like a properly taut thin skin head produces the best sound.</p>
<p></p>
<p>i just did a gourd this afternoon with a new shipment of super thin skins from elderly. went on easily and is now super tight and dry. before you tack, flip the gourd over on a flat surface so the open side is down, then rotate it 360 degrees while holding a pencil up to it so you can get a level line for the tacks. then pre-drill all the holes with a wire bit just slightly thinner than the shanks. i put the holes an inch apart, which works well for me. ill upload a pic of the one from today so you'll see what i mean.</p>
</div>
</div>
</blockquote> i always get the thinnest one…tag:minstrelbanjo.ning.com,2012-04-29:2477478:Comment:666032012-04-29T00:42:23.384ZMoschella Banjoshttps://minstrelbanjo.ning.com/profile/JamaicaPlainBanjos
<p>i always get the thinnest ones i can. they may be more susceptible to moisture, but i feel like a properly taut thin skin head produces the best sound.</p>
<p></p>
<p>i just did a gourd this afternoon with a new shipment of super thin skins from elderly. went on easily and is now super tight and dry. before you tack, flip the gourd over on a flat surface so the open side is down, then rotate it 360 degrees while holding a pencil up to it so you can get a level line for the tacks. then…</p>
<p>i always get the thinnest ones i can. they may be more susceptible to moisture, but i feel like a properly taut thin skin head produces the best sound.</p>
<p></p>
<p>i just did a gourd this afternoon with a new shipment of super thin skins from elderly. went on easily and is now super tight and dry. before you tack, flip the gourd over on a flat surface so the open side is down, then rotate it 360 degrees while holding a pencil up to it so you can get a level line for the tacks. then pre-drill all the holes with a wire bit just slightly thinner than the shanks. i put the holes an inch apart, which works well for me. ill upload a pic of the one from today so you'll see what i mean.</p> Thanks, Elderly seems to have…tag:minstrelbanjo.ning.com,2012-04-28:2477478:Comment:664262012-04-28T22:33:12.169Zjamie ganshttps://minstrelbanjo.ning.com/profile/jamiegans
<p>Thanks, Elderly seems to have two thicknesses. I see that some of the skins at various other places are categorized as "thick", "thin" and "medium". Any recommendations on thickness?</p>
<p>Thanks, Elderly seems to have two thicknesses. I see that some of the skins at various other places are categorized as "thick", "thin" and "medium". Any recommendations on thickness?</p> it is definitely important to…tag:minstrelbanjo.ning.com,2012-04-28:2477478:Comment:665992012-04-28T21:53:14.602ZMoschella Banjoshttps://minstrelbanjo.ning.com/profile/JamaicaPlainBanjos
<p>it is definitely important to cut it high enough so that the gourd is already sloping back inward -- this makes it much more structurally stable, and able to withstand the tension of a tight skin a lot better. speaking of which, elderly has some nice goat skins in stock for VERY cheap. make sure to get them so theyre at least a couple inches longer than you need in each direction. mid-east manufacturing has also been a very good source for inexpensive, but nice skins. just remember that you…</p>
<p>it is definitely important to cut it high enough so that the gourd is already sloping back inward -- this makes it much more structurally stable, and able to withstand the tension of a tight skin a lot better. speaking of which, elderly has some nice goat skins in stock for VERY cheap. make sure to get them so theyre at least a couple inches longer than you need in each direction. mid-east manufacturing has also been a very good source for inexpensive, but nice skins. just remember that you dont have to put a whole lot of tension of the first four tacks (in the cardinal directions (NESW)). just enough to get it slightly taut is sufficient. after that you can start pulling hard.</p> Thanks for the tips. Re. Skin…tag:minstrelbanjo.ning.com,2012-04-28:2477478:Comment:665152012-04-28T19:24:13.227Zjamie ganshttps://minstrelbanjo.ning.com/profile/jamiegans
<p>Thanks for the tips. Re. Skins:A friend is giving me a piece of goat skin but if you recommend being be prepared for mistakes where might be a good place to get additional skins ?</p>
<p>Re. mistakes, I think I already cut the gourd a little too short so I will pick up another one or two gourds from some growers.</p>
<p>Thanks for the tips. Re. Skins:A friend is giving me a piece of goat skin but if you recommend being be prepared for mistakes where might be a good place to get additional skins ?</p>
<p>Re. mistakes, I think I already cut the gourd a little too short so I will pick up another one or two gourds from some growers.</p> yup. upholstery nails. if you…tag:minstrelbanjo.ning.com,2012-04-28:2477478:Comment:665062012-04-28T02:41:50.973ZMoschella Banjoshttps://minstrelbanjo.ning.com/profile/JamaicaPlainBanjos
<p>yup. upholstery nails. if you go on ebay, you can find a zillion different kinds with all kinds of different finishes and head shapes. you really cant go wrong -- if you glue the head on under the tacks and dry it properly, you can pull the tacks out and play it without them, as they're only there to hold everything together while the glue and skin dry.</p>
<p></p>
<p>if youve never done a tack head before, make sure to buy two or three skins, as tearing the first one you do is almost…</p>
<p>yup. upholstery nails. if you go on ebay, you can find a zillion different kinds with all kinds of different finishes and head shapes. you really cant go wrong -- if you glue the head on under the tacks and dry it properly, you can pull the tacks out and play it without them, as they're only there to hold everything together while the glue and skin dry.</p>
<p></p>
<p>if youve never done a tack head before, make sure to buy two or three skins, as tearing the first one you do is almost unavoidable.</p> I've always used the kind cal…tag:minstrelbanjo.ning.com,2012-04-27:2477478:Comment:665842012-04-27T22:35:58.180ZIan Bellhttps://minstrelbanjo.ning.com/profile/IanBell
<p>I've always used the kind called "upholstery tacks"</p>
<p>I've always used the kind called "upholstery tacks"</p> Any kind of tacks you want to…tag:minstrelbanjo.ning.com,2012-04-27:2477478:Comment:664052012-04-27T22:18:48.871ZBell Banjoshttps://minstrelbanjo.ning.com/profile/TerryBell
<p>Any kind of tacks you want to use are alright. One of the first recorded descriptions of a gourd banjo stated that "little nails" were used. There are a couple of things you want to keep in mind with gourds and I drew up a quickie diagram..</p>
<p>Any kind of tacks you want to use are alright. One of the first recorded descriptions of a gourd banjo stated that "little nails" were used. There are a couple of things you want to keep in mind with gourds and I drew up a quickie diagram..</p>