Neck and Dowel Stick as One Unit - Minstrel Banjo2024-03-28T18:10:13Zhttp://minstrelbanjo.ning.com/forum/topics/neck-and-dowel-stick-as-one-unit?feed=yes&xn_auth=noRegarding dowel stick bending…tag:minstrelbanjo.ning.com,2011-09-06:2477478:Comment:498732011-09-06T00:33:09.623ZBart McNeilhttp://minstrelbanjo.ning.com/profile/BartMcNeil
Regarding dowel stick bending.... I have restored an old banjos and a few banjo mandolins with bent dowel sticks using concentrated hot steam to make the dowel pliable.... then when you bend the stick back to straightness if you over bend it just a bit and clamp it into position it will usually settle back to a pretty straight line. or if not then you can do it again.... one problem with approaching it this way is that it is necessary to remove the finish on three sides of the stick to allow…
Regarding dowel stick bending.... I have restored an old banjos and a few banjo mandolins with bent dowel sticks using concentrated hot steam to make the dowel pliable.... then when you bend the stick back to straightness if you over bend it just a bit and clamp it into position it will usually settle back to a pretty straight line. or if not then you can do it again.... one problem with approaching it this way is that it is necessary to remove the finish on three sides of the stick to allow the steam to penetrate the wood. This is roughly how bent wood furniture is made... Of course I also found out what happens when the water boils out off your steam source.... Charred dowel stick.... Not good. I used a one-piece for my fir…tag:minstrelbanjo.ning.com,2011-09-05:2477478:Comment:498712011-09-05T23:22:30.325ZTrapdoor2http://minstrelbanjo.ning.com/profile/Trapdoor2
<p>I used a one-piece for my first gourdy. Really a b*tch to make the heel match the spherical surface of the gourd, esp since I chose a club-heel (a la Dobson). The dowel took a dive to the left and would not straighten out. So, the dowel exits the back of the gourd a bit on the low side but if I tie the strings so that they exit on the top side of the dowel, it all lines up.</p>
<p>Next time, it will be a two-piece...unless the next one is an ekonting. ;-)</p>
<p>I used a one-piece for my first gourdy. Really a b*tch to make the heel match the spherical surface of the gourd, esp since I chose a club-heel (a la Dobson). The dowel took a dive to the left and would not straighten out. So, the dowel exits the back of the gourd a bit on the low side but if I tie the strings so that they exit on the top side of the dowel, it all lines up.</p>
<p>Next time, it will be a two-piece...unless the next one is an ekonting. ;-)</p> I never tried the wood thread…tag:minstrelbanjo.ning.com,2011-09-05:2477478:Comment:491052011-09-05T18:32:02.494ZBell Banjoshttp://minstrelbanjo.ning.com/profile/TerryBell
I never tried the wood threading device.
I never tried the wood threading device. I believe Jeff Menzies builds…tag:minstrelbanjo.ning.com,2011-09-05:2477478:Comment:498682011-09-05T14:37:44.824ZAndy Chasehttp://minstrelbanjo.ning.com/profile/anchase
I believe Jeff Menzies builds his necks with integral dowel stick from one piece of wood.
I believe Jeff Menzies builds his necks with integral dowel stick from one piece of wood. Have any of you builders trie…tag:minstrelbanjo.ning.com,2011-09-05:2477478:Comment:500382011-09-05T13:10:06.365ZBart McNeilhttp://minstrelbanjo.ning.com/profile/BartMcNeil
Have any of you builders tried using a wood threading device to make a dowel stick/heel joint? I think you could get a really good (but still easily removable) joint with a threader. I have one but havent't used it productively yet, except for making glueing clamps.
Have any of you builders tried using a wood threading device to make a dowel stick/heel joint? I think you could get a really good (but still easily removable) joint with a threader. I have one but havent't used it productively yet, except for making glueing clamps. My assumption has always been…tag:minstrelbanjo.ning.com,2011-09-05:2477478:Comment:498652011-09-05T12:54:57.511ZMoschella Banjoshttp://minstrelbanjo.ning.com/profile/JamaicaPlainBanjos
My assumption has always been that it is simply much more unwieldly to build a neck that way. Having the dowel stick as one unit means its harder to fit the neck to the rim, for example; such a joint often requires a great deal of precision and changes to fitment (not that many of the earliest makers seemed to care about subtleties of neck angle or alignment). The whole neck is more difficult to handle in a production setting, and overall it's just less convenient.
My assumption has always been that it is simply much more unwieldly to build a neck that way. Having the dowel stick as one unit means its harder to fit the neck to the rim, for example; such a joint often requires a great deal of precision and changes to fitment (not that many of the earliest makers seemed to care about subtleties of neck angle or alignment). The whole neck is more difficult to handle in a production setting, and overall it's just less convenient. Hi Bart,
If the old dowels we…tag:minstrelbanjo.ning.com,2011-09-04:2477478:Comment:498622011-09-04T21:35:57.315ZBell Banjoshttp://minstrelbanjo.ning.com/profile/TerryBell
<p>Hi Bart,</p>
<p>If the old dowels were put in with hide glue, I doubt if anyone but luthiers could get them out. But I think, yes, you answered you own question.</p>
<p>I never use the round plug method. I make full length neck and stick, or the Stichter joint, as I call it, or this...</p>
<p>look closely (courtesy of the database)....talk about solid!!...........…</p>
<p></p>
<p>Hi Bart,</p>
<p>If the old dowels were put in with hide glue, I doubt if anyone but luthiers could get them out. But I think, yes, you answered you own question.</p>
<p>I never use the round plug method. I make full length neck and stick, or the Stichter joint, as I call it, or this...</p>
<p>look closely (courtesy of the database)....talk about solid!!...........</p>
<p><a href="http://www.banjodatabase.org/images/Boucher_I_DoubleHead_StencilGirl/Boucher_I_Doublehead_StencilGirl_23.JPG" target="_blank">http://www.banjodatabase.org/images/Boucher_I_DoubleHead_StencilGirl/Boucher_I_Doublehead_StencilGirl_23.JPG</a></p>